Full-view glass
Raised-panel steel
Carriage house
Modern flush
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateGarage Door Company in San Mateo, CA
Garage door installation in San Mateo usually means replacing a 1950s or 60s door on a flat tract home east of El Camino, or upgrading a wider two-car door on a hillside home in 94402 or 94404. The fog-belt moisture off the Bay corrodes steel hardware year-round, so we plan each job around damp cycles and rust rather than temperature extremes. Whether you need a full replacement or a precision install on a newer home, call (855) 356-4591 and we’ll give you a written estimate before any work begins.
Why San Mateo Homes Are Different
San Mateo is split in two by El Camino Real, and that line defines what your garage door job looks like. East of El Camino, in the flat postwar tracts of 94401, thousands of original single-car wood tilt-up and early sectional doors are still turning on their first torsion springs. A door a homeowner assumes is fine is often sixty years old, with original hinges, and a tune-up call frequently turns into a spring-and-hinge replacement on the spot. West of El Camino and up into the hills, homes in 94402 and 94404 carry larger two-car openings, many of them view-facing and built for daily car cycles. Those doors need high-cycle torsion springs and hardware that holds up to heavy use in salt-laden air.
The climate works against steel components all year. Marine moisture from the Peninsula fog belt settles on tracks, hinges, and springs, so rust and corrosion are the primary causes of failure here, not cold weather. Mild winters mean little freeze stress, but the damp means a door that works fine in a dry inland city may be fighting oxidized tracks in San Mateo. When we install a new door here, we account for that: corrosion-resistant hardware where it matters, and a spring configuration matched to cycles, not just weight.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Our Main San Mateo Services
Most San Mateo homeowners call us for one of two reasons: a door that has stopped working or an opener that will not respond. Both are full-system problems, and we handle the complete assembly, not just one piece of it.
Garage Door Repair in San Mateo
Repair calls in San Mateo tend to cluster around the same failures: a snapped torsion spring on an aging East Side door, a cable that has rusted through in the damp air, or a track that has shifted out of alignment. On hillside homes we see more roller and hinge wear because the doors are heavier and cycled more often. One call covers the door and the opener, so we diagnose the whole system and tell you repair or replace, which one actually makes sense. Read the full breakdown on our Garage Door Repair in San Mateo page.

Garage Door Opener Repair in San Mateo
Opener failures here follow a pattern too: the logic board that has absorbed too many damp mornings, a gear that has stripped, or a safety sensor that has lost alignment. If your LiftMaster will not close or your Genie reverses for no reason, we know the brand and the failure mode. The work is brand-agnostic because we are trained across Chamberlain, Genie, LiftMaster, and Craftsman systems, so the recommendation follows your situation, not whatever part happens to be on the truck. Details are on our Garage Door Opener Repair in San Mateo page.

Garage Door Installation in San Mateo
Installing a garage door in San Mateo usually means one of two jobs: replacing an original postwar tilt-up or first-generation sectional on a single-car El Camino-corridor home, or outfitting a wider two-car hillside opening with a modern door that handles daily cycles and Bay moisture. The right install accounts for rust, racking on sloped driveways, and the weight of a door that faces constant fog. We handle Garage Door Installation as a full replacement or a new install in a framed opening, and the written estimate sets the final price before we start.
Garage Door Replacement
Signs you need it
Your door has rusted-through panels, cracked sections, a frame that no longer sits square, or springs and hinges that have been replaced so many times the door itself is the weak point.
What it costs in San Mateo
A new door installation in San Mateo typically runs $825 to $2,595 depending on size, material, and the condition of the existing opening.
How we do it
We remove the old door and track, inspect the framing for rot or racking, then install and balance the new door with new track, springs, and hardware in the same visit.
Garage Door Installation Service
Signs you need it
You are building a new garage, converting a carport, or the old opening is being resized and needs a door hung in a fresh frame.
What it costs in San Mateo
Installation service in San Mateo typically falls between $825 and $2,595 for a complete door hung and balanced, with the written estimate setting the final number.
How we do it
We measure the opening, order the door to spec, then install the track, hang the panels, set the torsion springs, and test the full cycle before we leave.
What Garage Door Installation Costs in San Mateo
| Item | Typical range in San Mateo |
|---|---|
| New door installation | $825 – $2,595 |
| Panel replacement | $295 – $590 |
| Opener installation | $295 – $650 |
Can you install a door in a 1950s San Mateo garage?
Yes. The old single-car openings east of El Camino are usually a standard width, and we replace the old tilt-up or early sectional with a modern steel door that fits the same frame. The framing may need minor correction, which the written estimate covers before work starts.
Does the fog air shorten a new door’s life in San Mateo?
It accelerates rust on untreated steel, so we install corrosion-resistant track and hardware and recommend a door with a rust-resistant finish for homes in the dampest fog-belt blocks. Proper balance and cycle-matched springs also reduce wear over time. Call (855) 356-4591 for a free estimate.
Brands We Service in San Mateo
We work on the brand you already have. Our technicians are factory-familiar with Clopay and Amarr doors, and Chamberlain and Genie opener systems, across the widest range of major brands in the industry. Parts for most San Mateo jobs are stocked locally, so a typical repair does not wait on a shipment. See our brands page for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Garage Door Company in San Mateo, CA
| Service | Typical range in San Mateo |
|---|---|
| Spring repair (one spring) | $210 – $400 |
| Cable repair | $155 – $295 |
| Opener repair | $140 – $380 |
| Opener installation | $295 – $650 |
| Panel replacement | $295 – $590 |
| Track realignment | $140 – $285 |
| Roller replacement | $130 – $260 |
| New door installation | $825 – $2,595 |
| Garage door repair | $175 – $710 |
What pushes a San Mateo price up is usually the door’s age and the damp: a rust-frozen torsion system takes longer to disassemble, and corroded track often needs replacement rather than adjustment. Whatever we find, the price is quoted and agreed in writing before any work starts, so the number you approve is the number on the invoice.
Neighborhoods We Serve in San Mateo
We run the whole city, from the flat postwar blocks east of El Camino to the hillside streets in the west. Most San Mateo calls get a technician dispatched the same day, Sunday through Friday.
- Shoreview
- Aragon
- Baywood
- San Mateo Park
- Hillsdale
Service Area – Cities Near San Mateo
We cover San Mateo and the surrounding Peninsula and East Bay cities. If you are in Foster City, CA, San Lorenzo, CA, San Leandro, CA, or Alameda, CA, the same crew and the same brand-specific expertise are available. We answer 24/7 and dispatch from 7am to 7pm, Sunday through Friday.
Serving San Mateo, CA – Our Local Coverage Area
We serve San Mateo and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Garage Door Company in San Mateo
We answer the phone 24/7 and dispatch fast from 7am to 7pm, Sunday through Friday. Most San Mateo neighborhoods fall within a short drive of our dispatch area, so same-day service is common. Call (855) 356-4591 and we will book the next opening.
Most San Mateo homeowners replace a door in the existing opening without a permit, but any change to the opening size or structural framing may require city approval. Ask the San Mateo building department about your specific project, or call us and we will tell you what we typically see on similar jobs here.
Some San Mateo HOAs, especially in the hillside neighborhoods and planned communities, do have design standards for door material and color. If your home is in an HOA, check the covenants before choosing a door. We can install whatever style the HOA approves, as long as the opening fits it.
Call Crestview Garage Door Repair at (855) 356-4591 for a free estimate on any garage door or opener job in San Mateo. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local garage door pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within the hour.
- 4You approve before work beginsNothing starts until you say go.
What San Mateo Customers Say
"Good repair, reasonable money. The door still has a slight shudder about a foot from the top that he said is the track being slightly out of true on an old frame and would cost real money to fix properly. Fair enough, but I'd hoped it would be perfect."
- Carmen Reyes"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Roger Barrett"Opener kept reversing halfway down. Turned out to be the safety sensors knocked out of alignment by a bicycle. He straightened them, wouldn't charge me for it, and just asked me to keep them in mind if I need real work later."
- Rafael Guzman